Call 08048954774 71% Response Rate

Send Email

Waterproofing Chemicals

We are a leading Wholesale Trader of cyh-500 (polyurethane injection grouts), cy-505 (polyurethane injection grouts), fosroc hydroproof extra chemical, fosroc brushbond cementitious acrylic waterproofing chemical, fosroc brushbond tgp and fosroc brushbond rfx from Pune, India.
CYH-500 (POlyurethane Injection Grouts)

CYH-500 (POlyurethane Injection Grouts)

Product Price: Rs 608 / sq ftGet Best Price

Product Details:
Property TypeCommercial
Applicable AreaWall
Grouting TypeConcrete
Property StyleNew Construction
Packaging TypeBox

CYH-500 is a hydrophobic grout based on polyurethane.

Upon contact with water, CYH-500 reacts to closed cell rubber-like foam while expanding its volume up to 27 times. The cured material is of a constant volume. Since water is not a component of the foam structure, the cured material is essentially not affected by water or dryness. The reacted material does not shrink or swell. Depending on the pressure of injection, CYH-500 reacts to a very dense material or foam.

Get Best QuoteRequest A Callback
CY-505 (Polyurethane Injection Grouts)

CY-505 (Polyurethane Injection Grouts)

Product Price: Rs 729 / KgGet Best Price

Product Details:
Property TypeCommercial
Applicable AreaWall
Grouting TypeConcrete
Property StyleNew Construction
Packaging TypeBox
CY-505 is Double component type hydrophobic polyurethane resin that cuts off water from cracks and reinforces the maintenance works on concrete structures, subways and tunnels.
It is a low expansion water stop reinforcing agent of which the water reaction expansion ratio is minimized.
Compared to conventional polyurethane water stop materials, it is stronger and its hardened foam is more rigid.
It does not generates defects by foam deformation and it provides virtually permanent water stop effect.
Get Best QuoteRequest A Callback
Fosroc Hydroproof Extra Chemical

Fosroc Hydroproof Extra Chemical

Product Price: Rs 170 / KgGet Best Price

Minimum Order Quantity: 500 Kg

Product Brochure

Product Details:
Physical StateLiquid
Packaging Size50Ltr.
UsageLaboratory, Industrial
Water Absorption1% maximum
BrandFosroc
Bond Strength to ConcreteApprox 1 N/mm 2
Hydroproof is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane.

Technical support:
  • Fosroc provides a technical advisory service supported by a team of specialists in the field.

Areas of application:
  • Below sloping screed or waterproof plaster on:
  • Roofs, terraces and balconies as a sandwich layer
  • Pools and fountains
  • Reservoirs and channels
  • End walls subjected to rain
Get Best QuoteRequest A Callback
Fosroc Brushbond Cementitious Acrylic Waterproofing Chemical

Fosroc Brushbond Cementitious Acrylic Waterproofing Chemical

Product Price: Rs 90 / KgGet Best Price

Minimum Order Quantity: 5 Kg

Product Brochure

Product Details:
Usage/Applicationwater proofing
Packaging Size5 Kg
TypeWater Proofing Compounds
ApplicationConstruction
BrandFosroc
CategoryWaterproofing Coating
Purity99.8 %
Constchem Enterprises are one of the most reliable Wholesalers and trader of Waterproofing Chemicals, AAC Block Jointing Mortar, Concrete Admixture Chemical, Construction Grouts etc.

Additional Information:

  • Production Capacity: N/a
  • Packaging Details: N/a
Get Best QuoteRequest A Callback
Fosroc Brushbond TGP

Fosroc Brushbond TGP

Product Price: Rs 90 / KilogramGet Best Price

Product Brochure

Product Details:
CategoryWaterproofing Coating
Packaging Size15 Kg
ApplicationConstruction
Packaging TypeBag
Shelf Life12 Months
Form of ChemicalSolid
BrandFosroc

With our expertise and trustworthiness, we are engaged in offering an optimum quality Brushbond TGP Chemical which is widely used.


Get Best QuoteRequest A Callback
Fosroc Brushbond RFX

Fosroc Brushbond RFX

Product Price: Rs 1,700 / BagGet Best Price

Minimum Order Quantity: 20 Bag

Product Brochure

Product Details:
Packaging Size15Kg
Packaging TypeBag,Can
UsageIndustrial
Purity99.8 %
BrandFosroc
Brushbond RFX is a two component acrylic polymer modified cementitious coating which consists of Brushbond RFX powder and Nitobond BBX acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating. Brushbond RFX can simply be applied by stiff brush, roller or trowel to obtain the desired thickness.

Advantages:
  • Excellent barrier to carbon dioxide, chloride and sulphate ions.
  • Allows water vapour to escape from the structure.
  • Waterproof-suitable for water retaining structures.
  • High resistance to the effect of long-term weathering, durable in all climate conditions including UV attack.
  • Non toxic - ideal for potable water tanks.
  • Flexible, with thermal expansion similar to concrete.
  • Excellent bond to concrete and masonry.
  • Good crack accommodation capacity.
  • Minimum surface preparation needed and low labour
    costs.
Get Best QuoteRequest A Callback
Weber Waterproofing Coating Chemical

Weber Waterproofing Coating Chemical

Product Price: Rs 4,500 / LitreGet Best Price

Minimum Order Quantity: 500 Litre

Product Details:
CategoryCementitious Waterproofing
ApplicationIndustrial Use
Purity99.8 %
BrandWeber
Form of ChemicalPowder
Pack Size30kg
Owing to a long-term destination for our business, we are engaged in offering a wide gamut of Weber Waterproofing Coating Chemical. Used for coating, vendors’ adroit professionals sternly check these products on well-defined parameters set by the industry that are widely used in numerous industries. Apart from this, our offered range is exceedingly demanded by our reputable clients for its outstanding features.
Get Best QuoteRequest A Callback
Wall Protective Coating Chemical

Wall Protective Coating Chemical

Product Price: Rs 65 / KgGet Best Price

Product Details:
Usage/ApplicationWaterproofing
BrandFosroc
ApplicationConstruction
Form of ChemicalLiquid
TypeWater Proofing Compounds
Grade StandardReagent Grade
CategoryWaterproofing Coating
Purity99.7 %

We are the leading organization actively occupied in providing an extensive series of Wall Protective Coating Chemical. This product is presented in numerous of specifications.

Get Best QuoteRequest A Callback
Waterproofing Coating Chemical

Waterproofing Coating Chemical

Product Price: Rs 65 / KgGet Best Price

Product Details:
Packaging Size30 L
BrandWeber
Packaging TypeBucket
Form Of PaintLiquid
Purity100 %
Model NameWeber.tec Superflex 10
ApplicationIndustrial Use

Being a foremost organization in this industry, we are actively engaged in offering the finest quality Waterproofing Coating Chemical which can be used for external and internal surfacing as well.


Get Best QuoteRequest A Callback
Gyproc Bond Chemical

Gyproc Bond Chemical

Product Price: Rs 150 / KilogramGet Best Price

Product Details:
Packaging Size15 kg
Grade StandardIndustrial Grade
Packaging TypeBucket
Packing TypeBucket
ApplicationConstruction
CategoryWaterproofing Coating
Constchem Enterprises are one of the most reliable Wholesalers and trader of Waterproofing Chemicals, AAC Block Jointing Mortar, Concrete Admixture Chemical, Construction Grouts etc.
Get Best QuoteRequest A Callback
Water Proofing Chemical

Water Proofing Chemical

Product Price: Rs 90 / KilogramGet Best Price

Product Details:
ApplicationConstruction
Form of ChemicalLiquid
TypeWater Proofing Compounds
Grade StandardReagent Grade
CategoryWaterproofing Coating
Purity99%
BrandLeakage
Packing TypeBottle
Constchem Enterprises are one of the most reliable Wholesalers and trader of Waterproofing Chemicals, AAC Block Jointing Mortar, Concrete Admixture Chemical, Construction Grouts etc.
Get Best QuoteRequest A Callback
Fosroc Brushbond

Fosroc Brushbond

Product Price: Rs 2,000 / Per BagGet Best Price

Product Brochure

Product Details:
BrandFosroc
CategoryWaterproofing Coating
Packaging Size20L
Packaging TypeBucket
Application TemperatureNot less than 10deg C
Brushbond is a two component acrylic polymer modified elastomeric waterproofing membrane which consists of Brushbond powder and Nitobond BB acrylic emulsion. It requires only the addition of water on site and when mixed in the proper proportions, an easily brushable coating is produced. Brushbond can simply be applied by a stiff brush, or trowel to obtain the desired thickness. Brushbond powder consists of specially selected cements, graded hard-wearing aggregates and additives supplied in powder and Nitobond BB liquid component of blended acrylic copolymers. The polymer provides Brushbond with exceptional adhesion, toughness and durability.

Advantages:
  • Minimum surface preparation needed - Low labour costs.
  • Applied directly to the damp concrete and masonry
  • Excellent adhesion - Bonds to porous and nonporous surfaces.
  • Non-toxic-ideal for potable water tanks
  • Waterproof - Excellent for damp-proofing basements
  • Breathable-allows transmission of water vapour from
    interior of building
  • Excellent for concrete roof, leaking brick and masonry
    walls
  • Good resistance to Carbon dioxide and Chloride ion
    diffusion
Get Best QuoteRequest A Callback
Renderoc Plug

Renderoc Plug

Product Price: Rs 852 / BagGet Best Price

Product Brochure

Product Details:
Usage/ApplicationInstant Waterstoper
Packaging Size5kg & 15kg
ColorGrey
TypeWater Proofing Compounds
CategoryWaterproofing Coating
Purity99.7 %
BrandFosroc
Packing TypePlastic Bag
Other Details:
  • Rapid setting cement-based, water-stopping mortars mortars conforming to the requirements of
  • BS EN 1504 Class R1
  • Uses
  • For the rapid patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations


Additional Information:

  • Delivery Time: immediate
Get Best QuoteRequest A Callback
Cebex 112

Cebex 112

Product Price: Rs 900 / BucketGet Best Price

Minimum Order Quantity: 20 Bucket

Product Brochure

Product Details:
Usage/ApplicationTo improve workability and trowelling properties of sand/ cement mortar mixes during application.
Packaging Size20L & 200L
Physical StateLiquid
BrandFosroc
Purity99.95%
Packing TypeBucket
We are offering Cebex 112 Waterproofing Chemicals. Uses to improve workability and trowelling properties of sand/cement mortar mixes during application. To increase qualityof masonry and plastering. Advantages improved moisture retention and bond strength Slows
Get Best QuoteRequest A Callback
Fosroc Hydroproof Xtra

Fosroc Hydroproof Xtra

Product Price: Rs 200 / Per LtrGet Best Price

Product Brochure

Product Details:
BrandFosroc
CategoryWaterproofing Coating
TypeWater Proofing Compounds
ApplicationConstruction
Grade StandardReagent Grade
Form of ChemicalLiquid
Single component acrylic polymer for cement based waterproof composite coating membrane
Get Best QuoteRequest A Callback
Brushcrete

Brushcrete

Product Price: Rs 3,500 / 20 litreGet Best Price

Product Brochure

Product Details:
BrandFOSROC
Packaging Size20L & 50L
Usage/ApplicationConstruction waterproofing
Grade StandardReagent Grade
Packaging TypeCan
Density2.1-2.2 g/cc.
Purity99%
Product TypeLiquid
Brushcrete is a single component acrylic based polymer when blended with cement forms a composite polymer modifi ed cementitious waterproofi ng system, when used in conjunction with fi bre mesh forms a tough hard wearing surface

Additional Information:

  • Delivery Time: immediate
Get Best QuoteRequest A Callback
LOKFIX E55S

LOKFIX E55S

Product Price: Rs 900 / NumberGet Best Price

Product Brochure

Product Details:
BrandFosroc
Usage/ApplicationIndustrial
Packaging Size300 ml Cartridges
GradeVinyl-ester resin base
Purity98%
Country of OriginMade in India
Lokfix E55 is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Two grades of Lokfix E55 are available, selection is based upon substrate installation temperature and compliance : Lokfix E55S: Standard temperature grade, optimised for substrate installation temperatures between -10 to +40ºC. Lokfix E55L: Low temperature grade, optimised for substrate installation temperatures: –20 to +15ºC. Lokfix E55L does not have C1 seismic approval or fire testing. Other grades of Lokfix are also available Lokfix E35 Resin anchor cartridge system based on styrene free polyester for lightweight fixings into concrete and masonry Lokfix E75 Resin anchor cartridge system based on pure epoxy for heavy duty anchoring.
Get Best QuoteRequest A Callback
Fairmate Readyplast

Fairmate Readyplast

Product Price: Rs 250 / KgGet Best Price

Minimum Order Quantity: 50 Kg

Product Details:
BrandFair Mate
Packing TypePlastic Bag
Grade StandardConsruction Chemicals
ApplicationExternal Plaster
Purity99.95%
Readyplast FB(I) is a premixed ready to use cement basedmortar for internal plaster, which ensures quality consistency. Readyplast FB(I) is a mixture of graded inert fillers, additives & binder.
Get Best QuoteRequest A Callback
CICO Tapecrete RTU Two Pack Polymer Modified Elastomeric Cementitious Waterproof Coating

CICO Tapecrete RTU Two Pack Polymer Modified Elastomeric Cementitious Waterproof Coating

Product Price: Rs 1,500 / CanGet Best Price

Product Brochure

Product Details:
BrandCico
Usage/ApplicationConcrete
Packaging Size28 kg in pre-measured quantities of pack A & B.
FormLiquid
UV ResistanceYes
Chemical ResistanceYes
Model NumberTapecrete RTU
CICO TAPECRETE RTU is a two pack polymer modified cementitious elastomeric protective and waterproof coating. When it hardens it develops excellent bonding property to most building materials. It is suitable in both interior and exterior building and all other civil engineering applications. Cured film of CICO TAPECRETE RTU prevents dampness in buildings tanks, roofs and other concrete structures permanently.
Get Best QuoteRequest A Callback
Cico Tapecrete P151 Waterproof Coatings

Cico Tapecrete P151 Waterproof Coatings

Get Latest Price

Product Details:
BrandCico
Usage/ApplicationRoofs
Packaging Size20 Ltr & 50 Ltr
FormLiquid
Packaging TypeBucket
Chemical ResistanceYes
Model NumberP151
Cico Tapecrete P151 is used for surfacetreatment, protecting, waterproofing andrepairing concrete and masonry.Waterproofing of basements, toilets, terraces,roofs, swimming pools, water towers etc.General concrete repairs. Protection ofconcrete against corrosion, salt attack etc.
Get Best QuoteRequest A Callback
Tam Crete Plug (Rapid Setting Waterproof Plug)

Tam Crete Plug (Rapid Setting Waterproof Plug)

Product Price: Rs 610 / KgGet Best Price

Product Brochure

Product Details:
Usage/ApplicationMixing
Packaging Size20kg
TypeSealing
FeaturesSeal leaks
Purity99%
Form Of ChemicalPowder
BrandNormet
TamCrete Plug is a fast setting,hydraulic compound that instantly stops running water or seepage through masonry surfaces.It becomes harder and more resistant when subjected to mois ture.Tamcrete Plug is a non - shrink material that expands slightly and sets in about 70 seconds depending on the temperature of the mixing water and the surface to which it is applied .Lower temperatures will retard the set time; higher temperatures will accelerate the set time.
Get Best QuoteRequest A Callback
Conplast WL Compound

Conplast WL Compound

Product Price: Rs 140 / KgGet Best Price

Minimum Order Quantity: 500 Kg

Product Brochure

Product Details:
ApplicationConstruction
Usage/ApplicationIntegral Waterproofing
Coverage0.125ml/bag of Cement
ColorBrown
Packaging TypeBottle
Packaging Size20 L
Grade StandardReagent Grade
BrandFosroc
By keeping track with the modern trends, we are bringing forward a wide series of Conplast WL Compound to our valued patrons. Conplast WL is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly. Conplast WL waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder waterproofers as its use results in two fold improvement of concrete or mortar.
Get Best QuoteRequest A Callback
FIS EM Plus 390 S Chemical Anchor

FIS EM Plus 390 S Chemical Anchor

Product Price: Rs 1,200 / PackGet Best Price

Product Details:
MaterialEpoxy
BrandFischer
Model Name/NumberFIS EM Plus 390 S
Packaging TypeBottle
FormLiquid
Packaging Size585ml
Other Details:
  • FIS EM Plus with optimised formulation for improved load values in cracked and non-cracked concrete.
  • The ETA assessment guarantees a service life of 100 years, an external expert report even up to 120 years.
  • For rebar connections from diameter 8 to 40 mm.
  • Can be used with threaded rod FIS A or internal threaded anchor RG M I for temporary and removable fixing points.
  • FIS EM Plus is to be processed at temperatures down to -5°C.
  • More safety due to approvals for diamond drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2.
Get Best QuoteRequest A Callback
Brushbond RFX Grey

Brushbond RFX Grey

Get Latest Price

Product Brochure

Product Details:
Usage/ApplicationBrushbond RFX 2K Waterproofing Compound
Packaging Size20.088kg
Coverage12-14sqm in 2 Coat/ per pack
TypePower +Liquid Polymer
ColorGrey
MaterialWaterproofing
CategoryAcrylic Based Polymer Coating
Country of OriginMade in India
Brushbond is a two component acrylic polymer modified elastomeric waterproofing membrane which consists of Brushbond powder and Nitobond BB acrylic emulsion. It requires only the addition of water on site and when mixed in the proper proportions, an easily brushable coating is produced. Brushbond can simply be applied by a stiff brush, or trowel to obtain the desired thickness. Brushbond powder consists of specially selected cements, graded hard-wearing aggregates and additives supplied in powder and Nitobond BB liquid component of blended acrylic copolymers. The polymer provides Brushbond with exceptional adhesion,toughness and durability.
Get Best QuoteRequest A Callback
CRR-100 (Carbon Fiber Resin)

CRR-100 (Carbon Fiber Resin)

Product Price: Rs 1,139 / NumberGet Best Price

Product Details:
Packaging Size5 kg
Packaging TypeBucket
TypeSolvent-Cut
StandardEN
Application IndustryAutomotive
Usage/ApplicationPaints & Coatings
Get Best QuoteRequest A Callback
Acrylic Polymer Waterproofing Coating Chemical

Acrylic Polymer Waterproofing Coating Chemical

Product Price: Rs 3,500 / KgGet Best Price

Minimum Order Quantity: 50 Kg

Product Details:
Physical StateLiquid
Packaging Size20Ltr.
UsageLaboratory, Industrial
TypeWater Proofing Compounds
CategoryWaterproofing Coating
BrandFosroc
Packing TypeBucket
We offer an extensive range of Acrylic Polymer Waterproofing Coating Chemical to our customers. These are developed using the premium quality material and advanced technology.
Get Best QuoteRequest A Callback

Polypropylene Fiber

Product Price: Get Latest Price

Product Details:
Fiber TypePolyester fiber
Get Best QuoteRequest A Callback

SBR Latex

Product Price: Get Latest Price

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Constchem Enterprises. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.