Our range of products include fosroc lokfix p, tam cem nanosilica (nanocilica additive for durable sprayed concrete, nitobond ep std, renderoc rgl mortar cement, fosroc nitomorter pe mortar and maxx bond aac block adhesive.
Fosroc Lokfix P
Product Price: Rs 350 / NumberGet Best Price
Product Brochure
Product Details:
Purity
99%
Brand
Fosroc
Packaging Type
Box
Packaging Size
500 ml
Usage/Application
Construction
High strength corrosion resistant heavy duty anchoring. These anchors include bolts, tendons or dowels in drilled or formed holes located in concrete masonry, brickwork or natural rock. Permanent installation of reinforcement starter bars, foundation bolts, ballustrading, barriers and safety fences, railway tracks, ground anchors for towers, cranes, dock sills.
Get Best QuoteRequest A Callback
Tam Cem NanoSilica (Nanocilica Additive for durable Sprayed Concrete
Product Price: Rs 500 / KgGet Best Price
Product Brochure
Product Details:
Brand
Normet
Usage/Application
Construction
Packaging Size
20 Kg
Color
White
Grade Standard
Chemical Grade
Packaging Type
Drum
Type Of Admixture
Additive
Ph Value
9.5 +/- 1.0 %
Density
1.17 +/- 0.03 g/cm3
Alkali Content
Less than or equal to 0.2%
Chloride Content
Less than or equal to 0.1%
Tamcem Nanosilica is a pozzolanic alternative to traditional cementitious replacement s for durable concrete that provides sulphate resistance equivalent to typical microsilica at a much reduced dose.Tamcem Nanosilica is used in wet mix sprayed concrete processes for tunnelling and mining applications. The Product is suited as an addition to concrete providing improved fresh state and hardened properties.Importantly,Tamcem Nanosilica enhance durability of permanent sprayed concrete ground support.
Get Best QuoteRequest A Callback
Nitobond Ep Std
Product Price: Rs 2,600 / PackGet Best Price
Product Brochure
Product Details:
Brand
Fosroc
Packaging Size
4 L
Type
Epoxy Based
Form
Liquid
Packaging Type
Container
Grade Standard
Industrial Grade
Nitobond EP Std is a two component epoxy bonding agent supplied in pre-weighed quantities for ready on-site mixing and use.
Get Best QuoteRequest A Callback
Renderoc RGL Mortar Cement
Product Price: Rs 1,000 / PACKGet Best Price
Minimum Order Quantity: 100 PACK
Product Brochure
Product Details:
Brand
Fosroc
Shelf Life
6 Month
Packaging Size
25 Kg
Fresh Wet Density
2100 - 2200 kg/m3
Plastic Expansion
Approx. 0.004N/mm2
Flexural Strength
3N/mm2 @ 28 days
Young's Modulus
22 kN/mm2
Renderoc RG(L) is supplied as a ready to use blend of dry powder, which requires only the site addition of clean water to produce a free-flowing, non-shrink microconcrete. The material is based on Portland cements, and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, Renderoc RG(L) may be modified by the addition of 5mm to 12mm clean, graded saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc office should be consulted.
Get Best QuoteRequest A Callback
Fosroc Nitomorter PE Mortar
Product Price: Rs 3,000 / BagGet Best Price
Product Brochure
Product Details:
Brand
Fosroc
Usage/Application
Construction
Packaging Size
7.8 Kg
Material
Powder
Packaging Type
Packet
Nitomortar PE products are based on a polyester resin system. There are two grades: Nitomortar PE - for general purpose use; Nitomortar PE Concrete - a special grade allowing users to add suitable aggregate, thereby substantially reducing the cost of infilling larger voids. Winter versions of both products are available which are faster setting at low ambient temperatures. Both grades of Nitomortar PE are supplied as two-component products with pre-weighed quantities of liquid resin and powdered hardener, ready for on-site mixing and use. The hardener system enables the mix to be varied from a pourable consistency to a trowellable mortar without significantly affecting the setting times or strengths achieved. This makes the product extremely reliable in use.
Get Best QuoteRequest A Callback
Maxx Bond AAC Block Adhesive
Product Price: Rs 460 / Per 40 Kg BagGet Best Price
Product Brochure
Product Details:
Brand
Maxx Bond
Shelf Life
12 Months
Pot Life
80 to 90 min
Packaging Size
20,40 Kg
Density
1.5 to 1.6 gm/cc
Appearance
Free Flow Gray Powder
Maxx Bond AAC Block Adhesive (Jointing Mortar) an offering from Constchem Enterprises, is thin bed high strength, prem mixed, quality assured mortar comprising of ordinary portland cement, specially graded sand & polymers. It is specially formulated & easily applied, giving a better bonding with AAC Blocks, Hollow Blocks, Flyash Bricks.
Get Best QuoteRequest A Callback
TamCem HCA (Liquid Admixture for Controlled Concrete Hydration)
Product Price: Rs 250 / LGet Best Price
Minimum Order Quantity: 5 L
Product Brochure
Product Details:
Usage/Application
Construction
Packaging Size
20kg
Grade Standard
Chemical Grade
Packaging Type
container
Color
Brown
Brand
Normet
Shelf Life
N/a
Ph Value
N/a
TamCem HCA is a liquid additive for all fresh concrete and grout mixes where extended “open-time” becomes a crucial requirement for the construction process time frame. The product is designed to efficiently control cement hydration to allow for extended waiting times or delays on site, or readymix concrete transportation times. TamCem HCA eliminates the amount of rejected concrete due to loss of workability and helps contractors to stay within or even reduce the initially calculated material budget.TamCem HCA is a high performance hydration control admixture for all wet sprayed concrete. It can be used in tunnelling applications where low rebound and high performance in combination with TamShot alkali-free accelerator is needed.By adjusting the dosage, setting times of fresh concrete can be extended, giving an open-time typically in the range of 4 to 8 hours, but can be extended up to 2 days if required.TamCem HCA meets EN 934-2 requirements for set retarding admixtures, EN 934-5 requirements for consistence control admixtures and ASTM C-494 requirements for Type B, retarding and Type D, water reducing and retarding admixtures.
Additional Information:
Production Capacity: N/a
Delivery Time: N/a
Get Best QuoteRequest A Callback
Weber Joint Epoxy
Product Price: Rs 2,500 / UnitGet Best Price
Minimum Order Quantity: 2 Unit
Product Details:
Packaging Type
Bucket
Brand
Weber
Usage/Application
Adhesive
Packaging Size
5.5 Kg
Type
Ceramic
Categories
Thin-Setmortar
A two-part, high-strength epoxy adhesive and grout for interior and exterior use, available in a range of colours. For grouting tiles where chemical resistance and/or complete impermeability are required: hospitals, laboratories, laundries, kitchens, dairies, abattoirs, breweries, distilleries, refrigerated rooms, toilets, bathrooms, swimming pools, car wash bays etc. For fixing tiles where very high bond strength, toughness and flexibility are required.
Additional Information:
Production Capacity: N/a
Delivery Time: N/a
Get Best QuoteRequest A Callback
AAC Block Adhesive
Product Price: Rs 410 / BagGet Best Price
Product Details:
Brand
Maxx Bond
Packaging Size
50 Kg
Packaging Type
Sack Bag
For Use in
Side Walls
Porosity
Solid
Application
Construction
Material
Aerated Concrete
With honesty and hard work of our professionals, we have carved a niche for ourselves in this domain by offering high quality AAC Block. Autoclaved Aerated Concrete (AAC) is a certified green building material, which can be used for commercial, industrial and residential construction. It is porous, non-toxic, reusable, renewable and recyclable. Autoclaved aerated concrete (AAC) is made with fine aggregates, cement, and an expansion agent that causes the fresh mixture to rise like bread dough. In fact, this type of concrete contains 80 percent air. In the factory where it is made, the material is molded and cut into precisely dimensioned units.
Get Best QuoteRequest A Callback
Weber Joint Epoxy Construction Grouts
Product Price: Rs 50 / KilogramGet Best Price
Minimum Order Quantity: 500 Kilogram
Product Details:
Packaging size
5Kg
Packaging Type
Bucket
Brand
Weber
Form
Liquid
Application
Construction
A two-part, high-strength epoxy adhesive and grout for interior and exterior use, available in a range of colours. For grouting tiles where chemical resistance and/or complete impermeability are required: hospitals, laboratories, laundries, kitchens, dairies, abattoirs, breweries, distilleries, refrigerated rooms, toilets, bathrooms, swimming pools, car wash bays etc. For fixing tiles where very high bond strength, toughness and flexibility are required. Features and Benefits:
Manufactured under BSI Quality Assurance Scheme ISO 9001
Resistant to chemicals
Impermeable to liquids and easy to sterilise, clean and maintain
Flexible
High bond strength
Long working time
Easy to use
Available colours:
Grey
White
Beige, charcoal ivory available to bulk order .
Get Best QuoteRequest A Callback
FIS V 360 S Injection Mortar
Product Price: Rs 700 / PackGet Best Price
Product Details:
Brand
Fischer
Usage/Application
Wall Construction
Packaging Size
360ml
Packaging Type
Plastic Bottle
Form
Liquid
Shelf Life
1 Year
Model Name/Number
FIS V 360 S
The fischer high-performance mortar FIS V is the universal all-rounder for the most demanding requirements. The styrene-free vinylester-hybrid mortar is the first system worldwide that is approved for fixings in perforated brick, solid brick, concrete, and aerated concrete. The injection mortar system also benefits from approved system components such as anchor rods, anchors with internal threads, and injection anchor sleeves for fixings in concrete, aerated concrete, and masonry in both internal and external areas. The fischer high-performance mortar FIS V is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, and the Thermax stand-off insulation system.
Get Best QuoteRequest A Callback
Tam Crete Cr (Concrete Cleaner / Remover)
Product Price: Rs 300 / LGet Best Price
Product Brochure
Product Details:
Packaging Size
25kg
Packaging Type
Bucket
Brand
Normet
Form
Liquid
PH Value
3.0
Color
Blue
Density
1.12 g/cm3
Tam Crete CR is a non-toxic environmentally friendly concrete remover for the non mechanical removal of hardened concrete residue found on all equipment used for batching ,transporting and /injecting cementious materials.
Non Toxic rapid action product Easy to apply and remove. Removes cement based residues,hardened concrete and mortars. Does not Damage material like steel,aluminum,glass ,rubber or paint. Extends the working life of equipment.
Get Best QuoteRequest A Callback
Tam Crete SSL (Structural Support Liner)
Product Price: Rs 200 / LitreGet Best Price
Product Brochure
Product Details:
Usage/Application
Coating
Form
Liquid
Packaging Size
30 Kg
Brand
Normet
Packaging Type
Bucket
TamCrete SSL sets the standard in Thin Sprayed Liners. Over the years, TamCrete SSL has become a robust, cost effective structural support liner.TamCrete SSL is based on Acrylic resin and graded fillers and is not cement based or polyurea based.TamCrete SSL is versatile because it works often when no other means of support is available. It is mainly because it can be applied rapidly and safely, reinforcing the rock mass in the early stages using small compact spraying equipment.TamCrete SSL’s structural support mechanism is considered to be particularly relevant in high stress situations in which some loosening will have taken place and in which on-going stress-induced fracturing does occur. TamCrete SSL penetrates into the rock mass along open fractures and joints and acts as a hard, rough gouge, filling and increasing the cohesion across the fractures. This strengthens the rock mass and limits the ability of the rock fabric to move. (Key block-interlocking). Due to the good adhesion capability of TamCrete SSL it is an excellent support mechanism. The coverage with TamCrete SSL stops weathering and deterioration of fractures and preserves the excavation.Due to the reduced amount of material that is applied savings are realised with operational effectiveness on logistics, application, etc.TamCrete SSL is applied using highly mobile and light equipment without sacrificing spray production. TamCrete SSL can easily be applied in confined spaces and difficult access areas.TamCrete SSL is highly adaptable and can be sprayed on humid and wet areas (not onto pressurised running water). Owing to TamCrete SSL’s fast strength gain ground support may be carried out right up to the working face.
Get Best QuoteRequest A Callback
Power Gem EP 0/00/000/1/2 (EP Type)
Product Price: Rs 600 / KgGet Best Price
Product Details:
Usage/Application
Industrial
Form
Gel
Packaging Type
Drum
Brand
Poweroil
Packaging Size
250 Kg
Recommended for both plain and anti-friction bearings in a wide variety of applications such as automotive, earth moving equipments, gear couplings, electric motors mining equipments and general industrial machinery.
Used To : gear couplings, electric motors, mining equipments and general industrial machinery.
Get Best QuoteRequest A Callback
TamAcryl 2000 Acrylic Injection Resin
Product Price: Rs 200 / KgGet Best Price
Product Details:
Usage/Application
Industrial
Form
Liquid
Packaging Size
10 Kg
Brand
Normet
Packaging Type
Plastic Can
Model Number
TamAcryl 2000
TamAcryl 2000 is a blend of acrylic polymers used in conjunction with an accelerator and catalyst system. Upon mixing of the components, a chemical reaction occurs and a waterproof gel is formed. It is available in two grades - standard and slow set.
Get Best QuoteRequest A Callback
Fosroc Lokfix E75
Product Price: Rs 1,000 / NumberGet Best Price
Product Brochure
Product Details:
Packaging Size
385 ml
Color
Red
Category
Rebaring Chemical
Brand
Fosroc
Density
1.41 Kg/L
Temporary Service Temperature
-40 to + 72 Degree C
Thermal Conductivity
0.47 W/m.K
Electrical Resistance
1.2 x1012 Ohm m
Hardness
85 Shore D
Lokfix E75 is a two-component Epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly se-cure a variety of steel fixings into concrete and solid ma-sonry substrates. Lokfix E75 is ETA Certified approved product UsesFor concrete (solid, porous and light) and solid masonry. 1) Accredited for use in dry, damp and flooded concrete substrates Can be used with cracked concrete 3) Fixing of post installed reinforcement Anchoring of threaded rod fixings Anchoring of internal threaded rod sleeves Internal, external and submerged conditions Can be applied to almost any size of fixing For horizontal, vertical and overhead application Bonding and surface crack sealing applications
Get Best QuoteRequest A Callback
Fosroc Supercast SW20 PVC Water Bar
Product Price: Rs 345 / MeterGet Best Price
Product Brochure
Product Details:
Material
PVC
Usage/Application
Easy to install into joint faces Factory made connectors enable
Color
Red
Size
10 mm x 20 mm x 5 mtr
Brand
FOSROC
Hardness
70 Shore A
Model Number/Name
Supercast SW20
Solids Content
100%
Unrestrained Volumetric Expansion
Up to 200%
Application Temperature Range
-20 to 50 Degree C
Service Temperature Range
-30 to 70 Degree C
Hydrostatic Pressure Resistance
100 Metres (10 bar)
Integral sealing for construction joints in concrete castin-situ. Typical uses include secant piled and diaphragm walled basements, pile caps and casting against old concrete. Supercast SW20 can provide simple solutions to detailing pipe entries, construction joints in the vertical plane and to kicker joints. Can be linked to Supercast SW 20 PVC waterstops to give an effective combination of waterstops which maintain network continuity.
Get Best QuoteRequest A Callback
Concure WB White Water Based Curing Compound
Product Price: Rs 140 / LitreGet Best Price
Minimum Order Quantity: 40 Litre
Product Brochure
Product Details:
Brand
Fosroc
Usage/Application
Industrial
Packaging Size
20 L
Form
Liquid
Packing Type
Bucket
Purity
100 %
Concure WB is a white, low viscosity wax emulsion which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non penetrating continuous film immediately upon contact with a cementitious surface. This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability. Once formed, the membrane will remain on the concrete surface until eventually broken down and eroded by natural weathering. Where it is required to apply a further treatment to such concrete surface, it may be necessary to remove the membrane remaining after curing by wire brushing or other mechanical means.
Get Best QuoteRequest A Callback
TamCem Micro Silica
Product Price: Rs 100 / KgGet Best Price
Product Brochure
Product Details:
Packaging Size
200 Kg
State
Powdered
Packaging Type
Drum/Barrel
Purity
90 %
PH Value
7
Brand
TamCem
TamCem Micro Silica is composed of silicon dioxide collected from metal and ferrosilicon. Tamcem Micro silica will react with the calcium hydroxide from the cement, which will form more of the calcium silicate hydrate, increasing the strength of the concrete. Using tamcem micro silica will also increase the durability of the concrete.
Get Best QuoteRequest A Callback
Diesel Exhaust Fluid
Product Price: Rs 35 / LGet Best Price
Product Details:
Usage/Application
Automotive
Packaging Size
10 Litre
Brand
AdBlue
Form
Liquid
Purity
99.99%
Packaging Type
HDPE Can
AdBlue® is high purity urea solution, acts as NOx reducing agent for diesel-engine vehicle fitted with Selective Catalytic Reduction (SCR) technology. Combined with the AdBlue®, SCR catalyst reduces nitrogen oxide (NOx) emissions effectively to meet Bharat VI, Euro 4, 5 & 6 emission standards.AdBlue® is VDA (German Automotive Industry Association) registered trademark and APAR INDUSTRIES LIMITED offers VDA licensed AdBlue® as per IS 22241 standards.
Get Best QuoteRequest A Callback
TamSoil 190CF
Product Price: Rs 600 / KgGet Best Price
Product Brochure
Product Details:
Usage/Application
Industrial
Brand
Normet
Packaging Size
200 L
Packaging Type
Drum
Features
Works with both acidic and alkaline type soil conditions
Form
Liquid
pH Value
6.5 - 8.5
Density
1.03 +- 0.02
Solubility in Water
100%
Appearance
Pale Yellow Liquid
TamSoil 190CF is a soil conditioning foam specifically developed to be used with tunnel boring machinery (TBM). It acts as a soil conditioner for various types of soil conditions ranging from silty sand to sandy clay types. The use of TamSoil 190CF results in the creation of temporary cohesion of the soil as well as a reduction in water permeability. TamSoil 190CF gives the soil a cohesive characteristic which is necessary for tunnel boring. The foam also provides an air cushion for the soil which compensates for the abrupt pressure changes at the tunnel face.
Get Best QuoteRequest A Callback
Lokfix E35S
Product Price: Rs 800 / PieceGet Best Price
Product Brochure
Product Details:
Country of Origin
Made in India
Brand
Fosroc
Model Number
Lokfix E35S
Packaging Type
Plastic Tube
Packaging Size
35 ml
Other Details:
Lokfix E35 is a two component Polyester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Three grades of Lokfix E35 are available, selection is normally based upon the substrate installation temperature :
Lokfix E35S: Standard temperature grade, optimised for substrate installation temperatures between -5 to +40ºC.
Lokfix E35L: Low temperature grade, optimised for substrate installation temperatures between -10 to +30ºC.
Lokfix E35T: Tropical temperature grade, optimised for substrate installation temperatures between +10 to +45ºC. Other grades of Lokfix are also available
Lokfix E55 Resin anchor cartridge system based on styrene free vinyl-ester for medium to heavy duty anchoring.
Lokfix E75 Resin anchor cartridge system based on pure epoxy for heavy duty fixings.
